Rooster & Fleur-de-Lis Copper Backsplash — Natural Copper

$627.00 USD

Sale Sold out

Shipping is Free. Duties & Taxes Included.

Size W×H — works anywhere; labels show typical use

Delivered to your door

· Free Shipping

Rooster & Fleur-de-Lis Copper Backsplash — Natural Copper — Hand-Hammered Wall Art

A rooster mid-stride — one leg raised, tail feathers fanning wide in layered arcs, comb and wattle sharp, beak pointed, eye alert — centered in a recessed rectangular panel, flanked on both sides by vertical columns of stacked fleur-de-lis. The most iconic combination in French country kitchen design, hand-hammered in raised copper relief in Natural Copper. The rooster catches the light across every feather curve, the fleur-de-lis columns reading in precise repeat at the edges, the fine-textured background filling every inch of the panel.

Hand-hammered from flat copper sheet in our family workshop using traditional chasing and repoussé techniques. Every feather, every fleur-de-lis, every detail of the rooster formed by hand. Made to your exact dimensions. 15 finishes. Over 10,000 pieces installed.

Finish & Size

Natural Copper shown — warm luminous copper tone · Silver–Copper · Copper–Black · Black Copper · Silver–Black · and 10 more — 15 finishes total, select above
Any size — select above, or send your measurements and we’ll add your size

Common Uses

Kitchen — stove backsplash, sink wall, full wall counter to cabinet
French country, Provence, or farmhouse kitchen — the natural home for this design
Dining room — feature wall, sideboard backdrop
Entryway — statement panel on the main wall
Outdoor — covered patio, garden wall, outdoor kitchen
Commercial — French bistro, wine bar, farmhouse restaurant

Order As Shown or Request a Custom Design

Order this rooster and fleur-de-lis panel exactly as shown. Or request a variation — rooster only without the side columns, different border treatment, a hen instead of a rooster, or any other French country or farmhouse motif. We design from scratch. Tell us what you have in mind.

One Panel or a Full Project

One panel
A single panel, any size, for any wall in any room. Select your dimensions above.

Full wall kitchen backsplash panels set
A designed set of panels covering the full wall — ordered together, installed side by side.

A full kitchen project
The kitchen has multiple surfaces — the stove wall, the sink wall, the range hood, the island front. Each gets its own designed panel in the same finish. Not the same design repeated — each surface gets a design suited to its shape and position. The finish is what ties the kitchen together.

Multiple rooms
Each room gets a design suited to it — a piece for the dining room, one for the entryway, one for the outdoor kitchen. We look at the space and design accordingly. The finish connects the rooms. The designs are each their own.

Send us photos of your walls and we’ll show you what we’d design for each space.

How It Works

Select size and finish above. Add cutout locations, personalization, or any project details in the notes field.
We send you a digital preview. You approve it before production starts.
We make it, photograph it, and ship it. Production ~2 weeks · shipping ~1 week · delivered within 3 weeks. Free shipping across the US.

Specs

Real copper sheet, hand-hammered, mounted on a solid backing panel
Natural Copper finish shown · 15 finishes available — select above
¼" thick, flush to the wall
Single panel up to 77×38" · larger walls covered with a set of panels
Sealed finish — no maintenance required · wipe clean with a damp cloth
Heat and splash resistant · indoor and outdoor · wet areas included

Installation

Adhesive mount — construction adhesive, no drilling, works on any wall surface. Screw mount — pre-drilled holes, decorative caps included. Hang — wire on back. Outlet, switch, and pot filler cutouts cut before shipping — no extra charge. Installation guide included.

Send us photos of your space and we’ll show you what we’d design for it. Contact us or open live chat.

Materials

Every Natuross backsplash is handcrafted from real 24-gauge copper or brass over a rigid composite backing, creating a finished thickness of approximately ¼ inch.

The result is lightweight, rigid, and designed for long-term use in kitchens and other living spaces.

Each backsplash is sealed with a clear protective finish to help resist moisture, fingerprints, cooking splashes, and everyday wear.

For many years, Natuross has specialized in handcrafted copper kitchen backsplashes, creating more than 10,000 custom pieces installed in homes across the United States.

Custom Sizes & Layouts

Every backsplash is made specifically for your kitchen.

Order a single backsplash behind the stove, matching side panels beneath your cabinets, or a complete kitchen backsplash designed for your full layout.

Outlets, switches, pot fillers, windows, vents, and other cutouts can usually be incorporated into the design.

If your exact size is not listed, simply send us your approximate width × height after ordering. We usually add custom sizes quickly.

For the best fit, measure the finished opening and subtract approximately ⅛ inch from each side. This small installation allowance is normally unnoticeable and helps create an easier installation and professional result.

Design

Choose from one of the largest collections of handcrafted copper backsplash designs available, including trees, wildlife, landscapes, botanical, decorative, symbol, and personalized designs.

Every design can be handcrafted in any available finish and adapted to your measurements.

Looking for something unique? Simply tell us your design idea when ordering. If you have an inspiration image, you may upload it as well.

We create your custom design for approval before production begins.

Every order includes a digital preview, and production begins only after you approve the design.

When your backsplash is complete, we also send photos of the finished work for final approval before shipping.

Installation

Most customers install their backsplash in less than an hour.

Choose from Adhesive Mount, Screw Mount, or Hanging Wire installation.

Adhesive Mount is the most popular choice for kitchen backsplashes and is suitable for most properly prepared drywall, tile, wood, stone, brick, and metal surfaces.

Installation instructions are included with every order.

Care & Cleaning

Natuross backsplashes are designed specifically for kitchens and have been installed behind thousands of stoves and ranges.

Each backsplash is sealed with a clear protective finish that helps keep grease and cooking splashes on the surface, where they can be wiped away with a soft cloth, warm water, and mild dish soap.

No polishing or special maintenance is required under normal household use.

Production & Delivery

After your order is placed, we review the details and usually prepare your digital design preview within one business day.

Once you approve the design, your backsplash is handcrafted specifically for your order. Production typically takes about three weeks, although rush production may be available depending on our workshop schedule.

Before shipping, we send photos of your completed backsplash for final approval.

Orders ship with tracking and are typically delivered about one month after the order is placed.

From your first message to final delivery, our goal is to make ordering a custom copper kitchen backsplash simple, personal, and worry-free.