Copper Full Kitchen Backsplash Set

Copper Full Kitchen Backsplash Set — Hand-Hammered, Made to Your Entire Kitchen

Natuross hand-hammers copper panels for every surface in your kitchen. Every piece made to your exact dimensions, in any design, in any of 15 finishes. This is not a single panel behind the stove — it is a coordinated set designed together as one continuous composition, covering as much of your kitchen as you want. Over 10,000 pieces made.

How It Works

Step 1 — Send us your kitchen photos. Straight-on photos of the wall or walls you want to cover. Rough measurements are helpful but not required — photos alone are enough to start.

Step 2 — We design the full composition. We lay out the complete scene across your kitchen — the stove wall, the sink wall, the window wall, the hood, the island — showing exactly how the design fills each surface and where each panel ends and the next begins.

Step 3 — You approve the layout. You see the full composition before anything is made. We refine until it’s right. Nothing goes into production until you say so.

Step 4 — We make every piece. Each panel hand-hammered to its exact dimensions. The full set ships together, approximately 3 weeks from approval.

Step 5 — Installation. Pieces install in sequence — the composition assembles on your wall exactly as designed. Step-by-step guidance included.

→ Live chat — fastest way to start
→ Contact page

What the Set Can Include

1. Stove wall backsplash — the hero of the composition, centered above the burners, extending left and right to the edges of the wall
2. Sink wall backsplash — the scene continuing to the sink wall, the full kitchen wrapped in one composition
3. Window surrounds — panels above, beside, or between windows, the design framing the view outside
4. Under-cabinet strips — the composition running below the cabinets, completing the coverage
5. Range hood panels — front, sides, chimney — the design rising from the backsplash to the hood
6. Kitchen island panels — front and sides — the copper wrapping the island
7. Appliance panels — dishwasher, refrigerator, wine fridge, microwave, wall oven
8. Signs and personal touches — family name, quote, monogram, house name
9. Finishing strips and trim — edges, corners, transitions

You don’t need to decide all of this upfront. Send us your photos and we’ll recommend the configuration that works best for your space and your budget.

Any Design. Any Finish.

Any design from the Natuross catalog — or describe what you love and we create something new at no extra charge. The most popular full kitchen designs: grapevine, rooster, olive branch, wheat stalks, Tree of Life, mountain scene, fleur-de-lis, and hundreds more.

15 finishes: Natural Copper · Brown Copper · Green Copper · Blue Copper · Fire Copper · Black Copper · Copper–Black · Silver · Silver–Copper · Silver–Gold · Silver–Black · Gold · Antique Gold · Black–Gold · Gold–Black

Customer Projects

Heather’s Kitchen — 9 Panels — Design in Progress

Full Kitchen Backsplash + Island Insert + Desk Panel + Sign Panel — Brown Copper finish

Sink Wall (3 panels): Left 27.5×13.625" · Center Strip 59.75×3" · Right 78×13.5"
Stove Wall (3 panels): Left 48.25×13.75" · Center 30.25×33" · Right 20.125×14"
Sign Panel: 60×15" · Desk Panel: 60×13" · Island Insert: 18.75×26.25"

Chris’s Kitchen and Laundry — 9 Panels — Completed and Installed

Full Kitchen + Bar + Laundry — Continuous wilderness scene — Bear hero panel above the stove

Stove Wall: Left 13.25×18.5" (pine forest) · Center Hero 30×27.625" (bear + mountain peaks) · Right 36.375×18.5" (mountain continuation)
Sink Wall: Left 47.75×18.5" · Center Strip 41.875×7.375" · Right 39.25×18.5"
Bar Area: 47.5×3.8125" · Laundry Back: 29.5×18.75" · Laundry Left: 25.125×18.75"

Your project will be listed here too.

Material & Specs

• Real copper sheet, hand-hammered using traditional chasing and repoussé techniques
• About ¼ inch thick — sits flat against the wall like tile
• Lighter than wall tile, rigid and strong, with no flex or warping
• Weights per piece: 24×18" — 6.1 lbs · 36×30" — 15.5 lbs · 48×36" — 25 lbs
• Sealed with clear lacquer — wipe clean with a damp cloth; ages beautifully over time or recoat to maintain the original finish
• Heat-resistant and safe next to stoves and cooktops
• Every piece made to your exact measurements
• Seams fall at natural design breaks — never through the main subject
• Free shipping anywhere in the United States

Installation

Pieces install in sequence, starting with the stove center panel, then working outward. Adhesive mount is the standard method for backsplash panels.

• Adhesive Mount — construction adhesive on the panel back. Over tile, drywall, stone, or wood.
• Screw Mount — pre-drilled holes with matching decorative screw caps.

Step-by-step installation guidance included.

Pricing

Full kitchen sets are priced based on your exact wall dimensions and configuration. Select a reference size above to start the conversation, or reach out directly with your photos and measurements for a complete quote.

Common Questions

Do I need precise measurements? Not at all. A photo is enough to start.
How long does it take? About 3 weeks from approval to delivery.
Can I see the full composition before anything is made? Always — including the piece breaks and seam placement.
Will every piece fit perfectly? Every panel made to your exact measurements.
Can I add a pot filler hole or outlet cutout? Yes — included at no extra charge.
How do I clean it? Damp cloth only. No special products needed.

You Work Directly With the Craftsman

One workshop. Every set made by hand. Every message answered by the person who makes the work.

• Share your kitchen photos — walls, dimensions, design preference, finish
• We design the full composition — rendered into your kitchen before production starts
• Production begins only after your approval
• We photograph every finished panel — before the set ships
• Ships when you’re satisfied

Ready to see what your kitchen could look like? Send us your photos — live chat is open.