Installation Guide - How to Install Your Copper Backsplash, Sign & Artwork
"Your handmade copper artwork is ready to install! Choose from 10 mounting options depending on your space and needs. Follow this guide to install your copper backsplash, sign, or decor securely and easily."
📌 Need help? Contact us anytime via our Contact Page.
🛠️ Installation Methods & Step-by-Step Instructions
1. Tile Installation – Installed Like Traditional Wall Tiles
Best for: Kitchen backsplashes, permanent installations.
How It Works: The aluminum composite backing is perforated for strong adhesion.
Installation Steps:
- Prepare the Surface – Ensure the wall or existing tiles are clean, dry, and flat.
- Apply Tile Adhesive – Use tile adhesive, silicone, or construction adhesive on the wall.
- Press the Backsplash in Place – Firmly press the panel onto the wall.
- Let It Set – Allow the adhesive to fully cure before cleaning or using the surface.
2. Stick (Removable) – Damage-Free Wall Mounting
✔ Best for: Renters, temporary installs, easy wall decor placement.
✔ How It Works: Removable mounting strips allow for secure attachment without damaging the wall.
📌 Installation Steps:
1️⃣ Peel Off the Tape Backing – The mounting strips are pre-attached to the back of the artwork.
2️⃣ Press Firmly Onto the Wall – Hold in place for 30 seconds for a strong grip.
3️⃣ Enjoy & Remove Easily When Needed – To remove, gently pull the strips downward to release the adhesive.
3️⃣ Stick (Strongly) – Permanent Adhesive Mounting
✔ Best for: Secure wall attachment without screws or drilling.
✔ How It Works: Strong double-sided mounting tape provides a permanent hold.
📌 Installation Steps:
1️⃣ Peel Off the Tape Backing – The strong adhesive tape is pre-attached to the back.
2️⃣ Press Firmly Onto the Wall – Apply strong pressure for 30-60 seconds.
3️⃣ Extra Security (Optional) – For extra durability, apply silicone or liquid nails around the edges.
💡 Pro Tip: Use Stick (Removable) for easy repositioning or Stick (Strongly) for a more permanent hold.
4️⃣ Screw Mount – Secure Wall Attachment
✔ Best for: Large backsplashes, outdoor signs, heavy-duty installs.
✔ How It Works: Pre-drilled holes & matching screws allow secure wall attachment.
📌 Installation Steps:
1️⃣ Mark the Drill Points – Hold the panel against the wall & mark the pre-drilled hole locations.
2️⃣ Drill Pilot Holes – Use a drill bit suitable for your wall type (wood, drywall, brick).
3️⃣ Secure the Screws – Insert screws into the pre-drilled holes & tighten.
4️⃣ Cover with Decorative Caps – Screw caps are included to match your patina finish.
💡 Pro Tip: Use anchors for extra stability on drywall or softer surfaces.
5️⃣ Hang (Sawtooth Hangers) – Quick & Easy Wall Hanging
✔ Best for: Wall art, decorative panels, lightweight signs.
✔ How It Works: Sawtooth hangers are attached to the backing for easy mounting.
📌 Installation Steps:
1️⃣ Mark the Wall for Placement – Measure and mark where you want to hang the artwork.
2️⃣ Insert Nails or Hooks – Hammer nails or wall hooks into the marked spots.
3️⃣ Hang the Artwork – Align the sawtooth hangers with the nails/hooks & place securely.
6️⃣ Hang (Hanging Wire) – Secure Suspension for Large Artwork
✔ Best for: Large wall art, oversized panels, framed pieces.
✔ How It Works: Steel hanging wire is attached to the back of the frame.
📌 Installation Steps:
1️⃣ Install Wall Hooks – Use heavy-duty hooks or screws based on your wall type.
2️⃣ Hang the Wire Over the Hooks – Center the piece for balance.
3️⃣ Adjust for Leveling – Slightly shift the wire to ensure the artwork hangs straight.
💡 Pro Tip: Use two hooks for extra stability on large panels.
7️⃣ Hang (Float Mount) – Creates a Modern 3D Floating Effect
✔ Best for: Contemporary wall displays, gallery-style hanging.
✔ How It Works: Float mount hardware with sawtooth hangers & strong tape allows the artwork to "float" slightly off the wall.
📌 Installation Steps:
1️⃣ Peel Off the Mounting Tape – Pre-attached for easy setup.
2️⃣ Attach to the Back of the Artwork – Press onto pre-marked areas.
3️⃣ Drill Screws Into the Wall – Secure screws in place.
4️⃣ Hang Using the Sawtooth Hangers – Adjust to achieve a perfect floating effect.
💡 Pro Tip: Leave a small gap between the wall & artwork for an elegant shadow effect.
8️⃣, 9️⃣, 10️⃣ Wood-Framed Hanging Options (Natural, Brown, Black)
✔ Best for: Pre-framed artwork, traditional wall decor.
✔ How It Works: Copper artwork is framed with a floating mount effect.
📌 Installation Steps:
1️⃣ Mark Drill Points for Hooks or Screws – Position where you want the frame to hang.
2️⃣ Install Hanging Hardware – Use strong wall hooks, screws, or nails.
3️⃣ Hang the Pre-Attached Wire Over the Hooks – Adjust for leveling.
💡 Frame Size Consideration: The outer size of the frame matches your selected size.
📌 Common Installation Questions
1️⃣ Which installation method is best for my space?
✔ Backsplashes: Tile installation or Stick (Strongly).
✔ Wall Art: Hang (Sawtooth, Wire, or Float Mount).
✔ Outdoor Signs: Screw Mount for extra durability.
2️⃣ Do I need professional installation?
✅ No! Our mounting options are DIY-friendly with easy-to-follow instructions.
📌 For detailed guidance, contact our support team at contact@natuross.com or visit our FAQs Page.
🚀 Order Your Handmade Copper Artwork Today!
Your copper backsplash, sign, or decor is not just metal—it’s a handcrafted masterpiece. Follow this guide for a seamless installation and enjoy your one-of-a-kind artwork!